– 21 –
Quick Start (cont’d)
Action Menu 2
? Enter choice:
See
oints Test
Chan
e close time
Previous More
Action Menu 2 has three feature selections:
•
See points –
Displays the number, description and current status of
each protection point.
•
Change close time –
Changes the close (system on) time of protection
groups.
•
Test –
Takes you to the Test Submenu for testing of protection groups,
points, holdup devices, and/or the bell and display.
EXERCISE: SEE POINTS
From Action Menu 2, choose
See points
to enter a submenu. Press
Supervisory, Burglary, Holdup, or Fire (depending on services being
provided). If Burglary is selected, select which group. Press
Installed
.
This will show you the first point of the selected service. If there is
more than one point in this service, press
Next
to see the next point.
NOTE:
Next and Previous will not be displayed if there is only one
point in that service. Press
Quit
to return to Action Menu 2.
EXERCISE: TEST
The test function is used for testing points, groups, and alarm
functions of your security system. To explore this function, enter your
ID code and enter Action Menu 2 by pressing
More
at Action Menu 1.
Press
Test
to go to the Test Submenu. Press
More
to display Test
Submenu 2. Press
Quit
to return to Action Menu 2.
To Next Page
Loading...
