3URJUDPPLQJ 0DLQWHQDQFH3URJUDPPLQJ/HYHO
8QLPRGH31&
Pressing 1 while viewing the System Screen will cause the following screen to be
displayed:
To change the time, press 1 to display the following screen:
A flashing cursor will appear on the left side of the display. Enter the four digit number
corresponding to the time (0000 - 1259). When the fourth digit is entered, the cursor will
move one position to the right. Press 1 for AM or 2 for PM to complete entering the time.
The display will return to the Time and Date Screen displaying the new time.
To change the date, press 2 while viewing the Time and Date Screen. The following
screen will be displayed:
A flashing cursor will appear on the left side of the display. Enter the two digit month,
two digit day and four digit year. The cursor will move one position to the right after each
entry. When the fourth digit of the year has been entered, the display will return to the
Time and Date Screen which will show the new date.
@@@TIME@AND@DATE
1=TIME @01:00@AM
2=DATE@@01-01-2001
@@@@@@@@@@@@@@@12HR
Time and Date Screen
@@@@@ENTER@TIME
01:00@AM
1=AM@@@@@@@@@@@@2=PM
Time Screen
@@@@@ENTER@DATE
MONTH@DAY@YEAR
01-01-2001
Date Screen
To Next Page
Loading...
Need help?
General
