OVERVIEW NetVanta 3000 Series Hardware Installation Guide
34 Copyright © 2006 ADTRAN, Inc. 61200860L1-34L
NetVanta 3430 Features and Specifications
• Single-slot, dual-Ethernet modular IP router
• Modular IP access routers for MPLS, Frame Relay, Multilink Frame Relay, PPP, Multilink PPP,
PPPoE, ATM and HDLC networks
• High performance processor
• Hardware encryption engine embedded
• On-board Flash memory
• Expandable DDR SDRAM via Small Outline Dual Inline Memory Module (SODIMM) (1 GB max.)
• Expandable Flash memory storage via a CompactFlash
®
(CF) card slot on the front panel
• Two integrated 10/100 BaseT WAN/LAN ports
• ADTRAN Operating System (AOS) Command Line Interface (CLI)
• User-friendly, web-based Graphical User Interface (GUI)
• Standards-based BGP, OSPF, RIP, static routing, and bridging protocols
• Integral stateful inspection firewall protects against Denial of Service (DoS) attempts
• Flash memory supports multiple images of AOS
• Interchangeable Network Interface Modules (NIMs)
• Modular Network Interface: 56k/64k DDS, T1/FT1, T1/FT1 + DSX-1, Dual T1, E1/FE1, E1/FE1 +
G.703, or ADSL (Annex A or Annex B), SHDSL, or serial interface
• Dial backup to any PPP-compliant device
• Analog modem, ISDN BRI (U or S/T), or serial Dial Backup Interface Modules (DIMs) available
• 500 IPSec VPN tunnels (software optional) with DES, 3DES, and AES encryption
• Compatible with IPSec VPN-equipped devices
• Quality of Service (QoS) with class-based weighted fair queuing (CBWFQ), low latency queuing
(LLQ), weighted fair queuing (WFQ), and DiffServ marking
• Built-in alert and logging mechanisms
• Network Address Translation (NAT/NAPT) and NAT Traversal version 2
• NAT-compatible SIP ALG
• DHCP client, server, and relay
• XAUTH including RADIUS, RSA SecurID, and TACACS+
• TFTP, FTP, XMODEM for firmware upgrades and maintenance updates
• Telnet, HTTP, SSH, SSL, Syslog, craft/console port, or SNMP management options
• Field-upgradable and remotely configurable
• Supports up to two T1s of bandwidth
• 1U-high desktop or rackmountable metal enclosure (requires rackmount kit P/N 1200827E1, which
must be ordered separately, for rack mounting)
• Size: 1.7-inch H x 11.7-inch W x 7.5-inch D
• AC Power Requirements: Auto-ranging power, 100 to 250 VAC, 50/60 Hz, 0.4A max
• RoHS compliant (Telecommunications exemption)
To Next Page
Loading...
Need help?
General
