Advanced Instruments Osmo1 Service Manual

Chapter 5 Settings
27
Osmo1™ Single-Sample Micro-Osmometer Service Guide
5.5 Setting date and time
The current date and time are set at the factory before
the unit ships. During initial setup, you might need to
change the date and time to suit the site.
NOTE: The Osmo1 displays the date and time under the
“Osmometer Ready” banner. Look there to see if
the timestamp is set correctly for the site.
In addition, you might need to adjust the date and time
in other circumstances (for example, going on/o
daylight savings time, after a power outage, etc.).
To change the date and time:
1. From the Settings menu, tap Date & Time.
The system prompts you to log in.
2. Select the Admin user and enter the appropriate
password.
The Date & Time screen opens (Figure 27).
Figure 27: Date & Time screen
3. On the Date & Time screen, set the date and time to
the correct values.
4. If desired, select the appropriate options for the
site’s preferred date and time format.
5. Tap Save to save the changes.
6. Tap Exit to return to the Settings menu.
NOTE: If the system detects unsaved changes, it asks
if you want to save changes before exiting.
5.6 Setting language
The language is set at the factory before the unit ships.
You might need to change the settings to suit the site.
To change the language:
1. From the Settings menu, tap Language.
The system prompts you to log in.
2. Select the Admin user and enter the appropriate
password.
The Language screen opens (Figure 28).
Figure 28: Language screen
3. On the Language screen, make the appropriate
selection and then tap Save.
4. Tap Exit to return to the Settings menu.
NOTE: If the system detects unsaved changes, it asks
if you want to save changes before exiting.
5. Power o the Osmo1 and wait 10 seconds; then
power on the instrument.
NOTE: This step is required for the language change
to take aect.
5.7 Setting up user accounts
Service technicians can use the default Admin account
for any tasks that require login.
For information about setting up user accounts for
operators, refer to the Osmo1 User Guide (133005UG).

Advanced Instruments Osmo1 Specifications

General

Brand	Advanced Instruments
Model	Osmo1
Category	Medical Equipment
Language	English