Advantech ASMB-785

73 ASMB-785 User Manual
Chapter 3 BIOS Operation
3.2.3.8 SATA And RST Configuration
Figure 3.45 SATA Configuration
 SATA Controller(s)
This item is to enable or disable SATA devices.
 SATA Mode Selection
Set as IDE, AHCI, or RAID when SATA Controllers are enable.
 SATA Controller Speed
Indicates the maximum speed the SATA controller can support.
 Port 0~5
To enable or disable SATA port 0~5.
 Hot Plug
Designates this port as Hot Pluggable.
 Port 0~5 Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
 Port 0~5 SATA Device Type
To identify the SATA is connected to Solid State Drive or Hard Disk Drive.