ASMB-785 User Manual 80
4.1 Before You Begin
To facilitate the installation of the enhanced display drivers and utility software, read
the instructions in this chapter carefully. The drivers for the ASMB-785 are located on
the software installation DVD.
Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software’s user manual before performing the installa-
tion.
4.2 Introduction
The Intel® Chipset Software Installation (CSI) utility installs the Windows INF files
that outline to the operating system how the chipset components will be configured.
This is needed for the proper functioning of the following features:
Serial ATA interface support
USB 1.1/2.0/3.0 support
Identification of Intel chipset components in the Device Manager
4.3 Windows OS Driver Setup
Insert the driver DVD into your system's DVD-ROM drive. You can see the driver fold-
ers items. Move the mouse cursor over the folder "01-Chipset". In CSI folder, you can
click find an executable file to complete implementation of the driver.
Note! The files on the software installation DVD are compressed. Do not
attempt to install the drivers by copying the files manually. You must use
the supplied SETUP program to install the drivers.
Note! The chipset driver is used for the following versions of Windows, and it
has to be installed before installing all the other drivers:
Windows® server 2008 R2 (64-bit)
Windows® server 2012 R2 (64-bit)
Windows® server 2016 (64-bit)
Windows® 7 (32-bit)
Windows® 7 (64-bit)
Windows® 8.1 (32-bit)
Windows® 8.1 (64-bit)
Windows® 10 (64-bit)
To Next Page
Loading...
Need help?
General
