PCA-6186 User’s Manual 58
Chapter 6 LAN Configuration
6.1 Introduction
The PCA-6186 features the 32-bit 10/100/1000 Mbps Ethernet network
interface. This interface supports bus mastering architecture and auto-
negotiation features. Therefore standard twisted-pair cabling with RJ-45
connectors for 10 Mbps, 100 and 1000 Mbps connections can be used.
Extensive driver support for commonly-used network systems is also pro-
vided.
6.2 Features
• Dual Intel 82562/82551 10/100Base-T Ethernet LAN controller
• Optional dual Intel 82540 10/100/1000 Base-T Ethernet LAN control-
ler
• Supports Wake-on-LAN remote control function.
• PCI Bus Master complies with PCI Rev. 2.2
• MAC & PHY (10/100/1000 Mbps) interfaces.
• Complies with 1000Base-T, 100Base-TX, and 10Base-T applications.
• Fully supports 1000Base-T, 100Base-TX, and 10Base-T operation.
• Single RJ-45 connector gives auto-detection of 10 Mbps, 100 Mbps, or
1000 Mbps network data transfer rates and connected cable types.
• Plug and Play.
• Enhancements on ACPI & APM.
• Complies with PCI Bus Power Management Interface Rev. 1.1,
• ACPI Rev. 2.0, and Device Class Power Management Rev. 1.0.
To Next Page
Loading...
