Advantech PCI Series User Manual

33 PCI Communication User Manual
Chapter 4 ICOM Tools
The columns in the Performance panels are explained briefly as follows:
Stop the Test
To stop the test on a specific port, press the Port Stop button on the toolbar or
click Stop on the Port menu. To stop the test on all ports, press the All Ports Stop
button on the toolbar or click Stop on the All Ports menu. You can restart the test
by pressing the Run button on the toolbar or by clicking Run on the Port menu. To
run all ports at once, press the All Ports Run button on the toolbar or click Run
on the All Ports menu.
4.4.3 Close Port
If you want to close a port, go to the tab for the com port you wish to close and press
the Port Close button or click Close on the Port menu.
4.4.4 Exit the ICOM Tools Utility
To exit the ICOM Tools utility, click Exit on the Port menu or press the Close button.
4.5 Status Bar and Message Logo Panel Messages
Messages appearing in the Status Bar and Message Logo panels give specific
information on your system settings and performance.
Port COM port number
Rx Length Received packet length (in bytes)
(Bytes/Sec.) Transmission rate
Last Abnormal Status Last abnormal status

Advantech PCI Series Specifications

General

Brand	Advantech
Model	PCI Series
Category	Industrial Equipment
Language	English