Advantech WISE-4210 Series User Manual

15 WISE-4210 Series User Manual
Chapter 2 General Specification
2.1.2 General
 Configuration Interface: Micro-B USB
 Connector:
WISE-S200: Plug-in screw terminal block (I/O and power)
 LED Indicator: Status, Error, Tx, Rx, Signal Level
 Mounting: DIN35 rail, wall, pole and stack
 Dimension (W x H x D): 70 x 112 x 38 mm
 Certification: CE(RED), NCC, FCC, IC
 I/O connector: 3.5-mm spacing plug-in screw terminal block
 Power connector: 3.5-mm spacing plug-in screw terminal block
 Real-time clock (RTC) accuracy: ±2 s/day
 Enclosure: PC
 Operation temperature: -20~70°C (-4~140°F)
 Storage temperature: -40~85°C (-40~185°F)
 Operating humidity: 5~95% RH (non-condensing)
 Storage humidity: 0~95% RH (non-condensing)
2.1.3 Power
 Power input voltage: 10 ~ 50 V
DC
 Power consumption:
– WISE-4210-AP: 0.8 W @ 24 V
DC
– WISE-4210 Nodes: 0.3 W @ 24 V
DC
 Battery socket (WISE-4210 Nodes only, not for WISE-4210-AP)
AA 3.6VDC battery x 3 (parallel connection)
 Battery life (2500mAh battery x3) @ 25°C:
– 625bps: 5 years with 10 minute update rate
– 50kbps: 5 years with 1 minute update rate
Note! Equipment will operate below 30% humidity. However, static electricity
problems occur much more frequently at lower humidity levels. Make
sure you take adequate precautions when you touch the equipment.
Consider using ground straps, anti-static floor coverings, etc. if you use
the equipment in low humidity environments.
Note! Measuring temperature and humidity will depend on sensor type.
Whether the device is measuring temperature or humidity depends on
the settings of the sensors.
Note! The battery life is estimated with 2500mAh battery, SB-AA11 by Vitzro-
cell Co.,Ltd.
Testing condition:
 WISE-4210-S231: Temperature/Humidity sensor
 WISE-4210-S251: Digital input only

Advantech WISE-4210 Series Specifications

General

Brand	Advantech
Model	WISE-4210 Series
Category	I/O Systems
Language	English