Advantech WISE-4210 Series User Manual

WISE-4210 Series User Manual 16
2.1.4 Software
 Utility: WISE Studio
 Driver: ADAM .NET Class Library
 WISE-4210-AP Protocols: TCP/IP, UDP, HTTP, HTTPS, DHCP, ARP, SNTP
 WISE-4210-AP supports RESTful Web API .JSON format
2.1.5 Configuration Interface
WISE-4210-AP
 Interface: LAN port
 Connector: RJ-45
WISE-4210 Nodes
 Interface: USB virtual COM port
 Connector: Micro-B USB
 USB chipset: Silicon Labs CP210x
 Driver: CP210x USB to UART Bridge VCP Drivers (https://www.silabs.com/
products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
2.2 WISE-4210-AP
2.2.1 Uplink Communication Port
LAN port
 Ethernet: IEEE 802.3u 10/100Base-T(X)
 Connector: 1-port RJ-45
 Protocol: Modbus/TCP, RESTful web API
RS-485 port
 Signal: DATA+, DATA-
 Connector: 3.5-mm spacing plug-in screw terminal block
 Protocol: Modbus/RTU
Note! Power saving is not for downlink mode.
Note! The battery life is estimated in the environment at 25°C. If the battery
operated in low temperature, the battery life would be lower. Here is the
estimation for battery SB-AA11 at different temperature:
 SB-AA11 @ 0°C: Less than 30%
 SB-AA11 @ -10°C: Less than 18%
 SB-AA11 @ -25°C: Less than 13%

Advantech WISE-4210 Series Specifications

General

Brand	Advantech
Model	WISE-4210 Series
Category	I/O Systems
Language	English