Advantech WISE-4210 Series User Manual

45 WISE-4210 Series User Manual
Chapter 4 System Configuration
4.5 WISE-4210-AP Configuration
Step 1. The default IP address of WISE-4210-AP is 10.0.0.1, if you are not able to
access WISE-4210-AP, please follow the steps below to search the IP address of
WISE-4210-AP.
Step 2. Configure the Ethernet adapter to 10.0.0.1 IP address. In the following figure,
the IP address is configured as 10.0.0.100. Find the Ethernet box in WISE Studio,
and click "Go to Configuration"
Step 3. After the above steps, WISE Studio will search WISE-4210-AP, and you will
see the IP address on the Device Information screen.
Step 4. Enter the IP address of WISE-4210-AP in the browser, or you can keep using
WISE Studio to make further configurations.
The default account and password of WISE-4210-AP to log into the web page is root
and 00000000. Cick "Login".

Advantech WISE-4210 Series Specifications

General

Brand	Advantech
Model	WISE-4210 Series
Category	I/O Systems
Language	English