AEE CONDOR series - Uav.battery.charging; Install.the.uav.battery

aee.com
12
UAVbatteryspecications:
Type Li-Pobattery
Capacity 6,800mAh
Ambienttemperatureforcharging 5℃~40℃
Ambienttemperaturefordischarging -10℃~40℃
AmbientRHforcharging/discharging <80%
ReadthisManualcarefullybeforeusingtheUAVbattery.Youshallbeheldliableforallconsequencescaused
byfailuretofollowthisManual.
1.2 UAV Battery Charging
(1) ConnectthechargertotheACpowersource(100~240V,50/60Hz).Useapoweradapterifnecessary.
(2) Inthechargingprocess,thebatteryLEDwillashdynamically.
(3) ThebatteryLEDwillremainonatfourbarswhenthebatteryisfullycharged.Now,removethebattery.

Fig.6
1.3 Install the UAV Battery
Pushthebatteryintothebatterycompartmentinthecorrectdirection(Fig.7).Thebatteryfasteneristin
placeifyouhearaclicksound.

Fig.7