AEG MC 4434 - Service and Repair Information

English
66
10. For optimum performance, do not place heavy objects onto the device.
11. Do not place the machine close to strong magnetic elds and do not
expose to direct sunlight or heat (such as e.g. close to radiators or fan
heaters).
12. Do not place the machine near to other devices which emit intense heat or magnetic ux such as e.g. radiators,
fan heaters, ovens, video recorders, stereo systems, radios or large speakers. Such appliances may distort the
picture and sound.
13. To prevent risk of injury, do not place the machine on unstable trolleys or stands.
14. To avoid damage, only use the supplied accessories (power cable, remote control).
15. Do not move the machine if there is a disc in the disc tray, otherwise this may damage the disc or the parts
inside the machine.
16. Do not insert objects into the disc tray.
17. Make sure that no objects such as e.g. needles, paper clips or coins are inserted into the device.
18. Condensation may appear in the device e.g. visibly behind the display, in the following circumstances:
• Straightaftertheheatinghasbeenswitchedon.
• Inasteamyordamproom.
• Straightafterthedevicehasbeenswitchedfromacoldtoawarmenvironment.
19. If condensation has formed, the machine may not function properly. To solve the problem, leave the machine
for about 1 hour in a warm environment (room temperature).
Service and Repair
1. Never try to dismantle or re-assemble the machine yourself. This may invalidate the warranty with immedi-
ate eect.
2. CAUTION! Never try to open the housing, because the device carries
very high voltage.
This constitutes an injury risk. If necessary, please seek the advice of
our service centre or qualied professionals.
3. CAUTION! All repairs may only be carried out by qualied and authorised specialists. Never try to repair the
machine yourself. This may render the warranty null and void with immediate eect.
4. Should your machine require specialist maintenance or servicing, please contact your authorised dealer or our
service centre.
5. If any parts need to be replaced, please ensure that only replacement parts approved by the manufacturer or
those which have the same features as the original parts are used. Using non-approved parts, amongst other
things, constitutes a re hazard and risk of electric shock.
6. After completing all repair work, you should ask the repair specialists to conduct a safety inspection of the
whole machine, in order to conrm whether the product is in an acceptable condiction.
7. If the drive components or optical lens is dirty or worn, the picture quality becomes poor.
8. CAUTION! If the following occurs, disconnect the machine from the mains and seek the advice of a qualied
repair specialist:
• Thepowercableormainsplugisdamaged.
• Themachineemitssmokeorstrangesmells.
• Waterhasgotintothedevice.
• Themachinehasbeenexposedtorainordamp.
• Objectshavegotintothemachine.