AEG MC 4434 - Setting the TV Standard (PAL, NTSC, AUTO)

English
75
4. If you connected the device to a television with PROGRESSIVE SCAN select the PROGRESSIVE option with the
Navigation button ▼ or ▲ and press the PLAY/ENTER button, to activate the setting.
5. If you connected the device to a television with interlaced scan type (to a conventional television) select the
INTERLACE option with the Navigation button ▼ or ▲ and press the PLAY/ENTER button, to activate the Set-
ting.
6. Press the SETUP button again to exit the Setup menu.
Notes:
• TheComponentportgivesthebestqualityconnectionbetweenthedeviceandatelevisionwithPROGRESSIVE
SCAN.
• OnlyspecictelevisionsetssupportPROGRESSIVESCAN.IfyouselectthePROGRESSIVEoptionforaconven-
tional (analogue) television, you will not be able to receive a picture.
• ThemenuitemTVMODEisinactiveifyouhaveselectedtheoptionCVBSforthevideooutput.
Setting the TV-Standard (PAL, NTSC, AUTO)
If the picture presentation of the TV does not work properly after connecting the DVD device (e.g. only black/white
reception, blurred colours), you must set the correct option for the TV standard/Colour transmission system (PAL,
AUTO or NTSC).
To select the correct colour transmission system for your TV, press the PAL/NTSC button. Each time you press the
PAL/NTSC button, you select a new TV-Standard - PAL, AUTO or NTSC.
Alternatively you can select the colour transmission system in the System Setup menu. To do so:
1. Whilst the disc is playing or after you have stopped play by pressing the STOP button, press the SETUP button
on the remote to open the Setup menu.
2. Using the Navigation button ► select the fourth icon PREFERENCE PAGE in the top menu bar and press the
PLAY/ENTER button to show the menu items.
3. Using the Navigation button ▼ select the menu item TV TYPE.
4. Then press the Navigation button ►, to show the available options of the TV-Standard/colour transmission
system.
5. Using the Navigation button ▼ or ▲ selected the required TV-Standard. The following options are available:
• PAL:SelectthisOption,iftheDVDsystemisconnectedtoaPALsystemtelevision.ThePALcolourtransmis-
sion system is mainly used in Europe, but also in Australia and South America as well as in many African and
Asian countries.
• AUTO:SelectthisOption,iftheDVDsystemisconnectedtoamulti-systemtelevision(compatiblewithPAL
as well as the NTSC colour transmission system).
• NTSC:SelectthisOption,iftheDVDsystemisconnectedtoanNTSCsystemtelevision.TheNTSCcolour
transmission system is used in many parts of the Americas and in several countries in the Far East.
6. Then press the PLAY/ENTER button to activate the setting.
7. Press the SETUP button to exit the Setup menu.