EN
1205. 6755517_02
24
18. GENERAL WARNINGS FOR THE
INSTALLER
AERMEC ANLs are constructed according to the re-
cognised technical standards and safety regulations.
Any contractual or extracontractual liability of the
Company is excluded for injury/damage to persons,
animals or objects owing to installation, regula-
tion and maintenance errors or improper use. All
uses not expressly indicated in this manual are
prohibited.
18.1. PRESERVATION OF THE DOCUMEN
TATION
1.
of the system, who assumes the responsi-
they are always at hand in case of need
.
2.
3. The appliance must be installed in such
a way as to enable maintenance and/or
repairs to be carried out
.
4. The appliance warranty does not cover
necessary for carrying out servicing under
warranty
.
5. Do not modify or tamper with the chiller
and the manufacturer will not be liable
for any damage caused. The validity of the
warranty shall be void in the event of fai-
.
18.2. WARNINGS REGARDING SAFETY
AND INSTALLATION STANDARDS
1. Must be installed by a qualified and suitably
trained technician, in compliance with the
national legislation in force in the country of
destination.
AERMEC will not assume any responsibility
for damage due to failure to follow these
instructions.
2. Before beginning any operation, READ THESE
INSTRUCTIONS CAREFULLY AND CARRY OUT
THE SAFETY CHECKS TO REDUCE ALL RISK
OF DANGER TO A MINIMUM. All the staff
involved must have thorough knowledge of
the operations and any dangers that may
arise at the moment in which the installation
operations are carried out.
TECHNICAL SECTIONINSTALLATION SECTIONUSER SECTION
-
PROTECTION RATING
1. IP 24
1. ISO DIS 9614/2
2.
3. SOUND PRESSURE
-
UL 1995
Heating and cooling equipment.
ANSI/NFPA
CSA C.22.1.- C.22.2
Safety Standard Electrical Installation.
To Next Page
Loading...
Need help?
General
