AGFA CR 85-X Reference Manual

46
4451C EN 2013-04-30Basic operation (‘Operator mode’)
CR 85-X DIGITIZER
Re-erasing image plates with status ‘to be erased’
To re-erase one or more image plates which you have given the status ‘to be
erased’ via the ID station:
1 Check that the CR 85-X is ready for operation:
• the CR 85-X must display the operator screen with ‘Ready’ or ‘Busy’ status.
• the status indicator at the top of the CR 85-X must be constant or flashing green.
2 Place the cassettes in the input buffer.
The CR 85-X will automatically erase the image plates. The display will read:
When the CR 85-X has erased the image plates, it displays the operator main screen.
3 Remove the cassette(s) from the output buffer.
READY
CR 85-X
Status
BUSY
* * * ERASING * * *

AGFA CR 85-X Specifications

General

Brand	AGFA
Model	CR 85-X
Category	Measuring Instruments
Language	English