65
4451C EN 2013-04-30 Advanced operation (‘Key-operator mode’)
CR 85-X DIGITIZER
The CR 85-X will display the Install software menu:
4 Open the left front door of the Digitizer.
Make sure you open the left front door first. When you open the left front door, the
power supply of all critical components is switched off automatically.
5 Insert the first floppy with the new CR 85-X software in the disk drive.
Please open the machine
front and insert the
first floppy ACP_XXXX in
diskette drive and
press
: quit
: ok
INSTALL
SOFTWARE
SERVICE XXXXX
MU
S
ICA
CR
85-X
CR
85-X
MUSICA