AGFA CR 85-X Reference Manual

66
4451C EN 2013-04-30Advanced operation (‘Key-operator mode’)
CR 85-X DIGITIZER
6 Press the Confirm key.
The CR 85-X will display:
7 If the CR 85-X displays the screen below, insert the second software floppy:
Proceed identically for the remaining floppy disks.
After the last floppy, the CR 85-X displays following screen:
8 Remove the floppy from the disk drive and press the Confirm key.
Checking
the volume label . . .
Volume is
<label>
INSTALL
SOFTWARE
SERVICE XXXXX
Please wait . . .
copying files to
E:\temp.....
INSTALL
SOFTWARE
SERVICE XXXXX
Please insert the
floppy ACP_XXXX_2
and press
: quit
: ok
INSTALL
SOFTWARE
SERVICE XXXXX
XXXX = software version
Please remove the floppy
and press
: quit
: ok
INSTALL
SOFTWARE
SERVICE XXXXX

AGFA CR 85-X Specifications

General

Brand	AGFA
Model	CR 85-X
Category	Measuring Instruments
Language	English