AGFA CR 85-X Reference Manual

68
4451C EN 2013-04-30Advanced operation (‘Key-operator mode’)
CR 85-X DIGITIZER
The CR 85-X will start copying the machine specific configuration data while
displaying the Save configuration screen:
12 When the screen below is displayed, note down the serial number, the date, and the
software version.
13 Remove the floppy from the disk drive and label it with the data from the screen.
14 Store the CR 85-X software floppies and the backup floppy in the storage box.
15 Close the front doors.
The CR 85-X will restart automatically.
After start-up, the operator main screen is displayed.
copying . . .
D:\ACP_<serial#>.zip
to
A:<path><file name>
: quit
: ok
SAVE
CONFIGURATION
SERVICE XXXXX
Machine configuration
saved. Label the floppy:
Backup CR 85-X
S/N: <serial#>
Date: <date>
SW version: ACP_XXXX
Please remove the floppy
and press
: quit
: ok
SAVE
CONFIGURATION
SERVICE XXXXX

AGFA CR 85-X Specifications

General

Brand	AGFA
Model	CR 85-X
Category	Measuring Instruments
Language	English