AGFA CR 85-X Reference Manual

79
4451C EN 2013-04-30 Advanced operation (‘Key-operator mode’)
CR 85-X DIGITIZER
13 When the screen below is displayed, note the serial number, the date, and the
software version.
14 Remove the floppy from the disk drive and label it with the data from the screen.
15 Store the floppy with the CPF-files of the CR 85-X and the backup floppy in the
storage box.
16 Close the front doors.
The CR 85-X will restart automatically.
After start-up, the operator main screen will be displayed.
Machine configuration
saved. Label the floppy
Backup CR 85-X
S/N: <serial#>
Date: <date>
SW version: ACP_XXXX
Please remove the floppy
and press
: ok
SAVE
CONFIGURATION
SERVICE XXXXX

AGFA CR 85-X Specifications

General

Brand	AGFA
Model	CR 85-X
Category	Measuring Instruments
Language	English