129
Chapter 4 Calibration and Adjustment
Calibration Errors
4
4
710 Self-calibration failed; Chan n, null DAC cal, invalid self cal
Self-calibration failed; Chan n, offset DAC cal with attenuator,
invalid self cal
Self-calibration failed; Chan n, offset DAC cal no attenuator,
invalid self cal
An error occurred while trying to do an internal cal of the specified DAC.
Self-cal has exited without changing the self-cal constants. Run self-test
to diagnose the cause of the problem.
711 Self-calibration failed; Chan n, null DAC cal gain too low, meas
value
Self-calibration failed; Chan n, null DAC cal gain too high, meas
value
Self-calibration failed; Chan n, offset DAC cal with attenuator
gain too low, meas value
Self-calibration failed; Chan n, offset DAC cal with attenuator
gain too high, meas value
Self-calibration failed; Chan n, offset DAC cal no attenuator gain
too low, meas value
Self-calibration failed; Chan n, offset DAC cal no attenuator gain
too high, meas value
The computed gain cal factor for the specified DAC was out of limits.
Self-cal has exited without changing the self-cal constants. Run self-test
to diagnose the cause of the problem.
712 Self-calibration failed; Chan n, null DAC cal zero too low, meas
value
Self-calibration failed; Chan n, null DAC cal zero too high, meas
value
Self-calibration failed; Chan n, offset DAC cal with attenuator
zero too low, meas value
Self-calibration failed; Chan n, offset DAC cal with attenuator
zero too high, meas value
Self-calibration failed; Chan n, offset DAC cal no attenuator zero
too low, meas value
Self-calibration failed; Chan n, offset DAC cal no attenuator zero
too high, meas value
Self-calibration failed; Chan n, GND measurement out of limits,
meas value
The computed zero cal factor for the specified DAC was out of limits.
Self-cal has exited without changing the self-cal constants. Run self-test
to diagnose the cause of the problem.
To Next Page
Loading...
Need help?
General
