3 Connect the other end of the keyboard cable to the keyboard.
Caution In addition to the U.S. English keyboard, the Agilent 35670A Dynamic Signal
Analyzer supports U.K. English, German, French, Italian, Spanish, and Swedish. Use
only the Hewlett-Packard approved keyboard for this product. Hewlett-Packard does
not warrant damage or performance loss caused by a non-approved keyboard. See the
beginning of this guide for part numbers of approved Hewlett-Packard keyboards.
4 To configure your analyzer for a keyboard other than U.S. English, press
[
System Utility
] [
KEYBOARD SETUP
]. Then press the appropriate softkey to select
the language.
Configuring your analyzer to use a keyboard other than U.S. English only ensures that
the analyzer recognizes the proper keys for that particular keyboard. Configuring your
analyzer to use another keyboard does not localize the on-screen annotation or the
analyzer’s online HELP facility.
Agilent 35670A Preparing the Analyzer for Use
To connect the optional keyboard
2-15
To Next Page
Loading...
Need help?
General
