30 Chapter 2
Agilent 4072/4073 Preinstallation Guide, Edition 4
Site Preparation
Upgrade to 4072A/4073A
Upgrade to 4072A/4073A
Upgrading from 4071A to 4072A
The Agilent E3196A upgrade kit is used to upgrade from the 4071A to the 4072A tester. In particular, the 4072A
requires 200 or 208 Vac instead of 100 or 120 Vac. If you are using the 4071A with 100 or 120 Vac, you must
prepare the 200, 208, 220, or 240 Vac.
The E3196A upgrade kit consists of the cabinet, HF matrix, some accessories, parts, and pulse generators (option).
The allowable number of 81110A and 8110A pulse generators are shown in Table 2-3.
The following space is required for upgrading:
Testhead: at least 2 × 2 m
2
(6.6 × 6.6 ft
2
)
Cabinet: at least 1 × 3 m
2
(3.3 × 9.8 ft
2
)
Upgrading from 4071A to 4073A
The Agilent E3197A upgrade kit is used to upgrade from the 4071A to the 4073A tester. In particular, the 4073A
requires 200 or 208 Vac instead of 100 or 120 Vac. If you are using the 4071A with 100 or 120 Vac, you must
prepare 200, 208, 220, or 240 Vac.
The E3197A upgrade kit consists of the cabinet, HF matrix, some accessories, parts, and pulse generators (option).
The allowable number of 81110A and 8110A pulse generators are shown in Table 2-3.
The following space is required for upgrading:
Testhead: at least 2 × 2 m
2
(6.6 × 6.6 ft
2
)
Cabinet: at least 1 × 3 m
2
(3.3 × 9.8 ft
2
)
Upgrading from 4072A to 4073A
The Agilent E3198A upgrade kit is used to upgrade from the 4072A to the 4073A tester. The E3198A upgrade kit
upgrades the testhead only, with the 4072A cabinet being used as the 4073A cabinet.
The allowable number of 81110A and 8110A pulse generators are shown in Table 2-3.
The following space is required for upgrading:
Testhead: at least 2 × 2 m
2
(6.6 × 6.6 ft
2
)
To Next Page
Loading...
Need help?
General
