Chapter 5: Troubleshooting
To configure the motherboard jumpers and set up the BIOS
5–31
Agilent Technologies Service Note Describes Upgrade Details
For improved performance and hard disk drive reliability refer to Agilent Technologies Service Note
54810A-06. This service note gives detailed information for upgrading to 64 MB RAM, upgrading to revision
2.51 or newer code, and enabling power management in the BIOS. This combination of upgrades and
power management settings enable the instrument to load the application into memory at powerup and
allows the hard drive to power down. This provides a quick response from the oscilloscope controls during
use while maximizing hard drive life.
To Next Page
Loading...
