Agilent Technologies 7000 Series - To Save a Method on the 7890 GC

5 Operating in EI Mode
To Save a Method on the 7890 GC
7000/7010 Series TQ GC/MS Operating Manual 127
To Save a Method on the 7890 GC
Procedure
1 Press [Method], and scroll to the specific method number.
2 Press [Store] and [On/Yes] to store the new method using the chosen
number. Alternatively, press [Off/No] to return to the stored methods list
without saving the method.
A message is displayed if a method with the number you selected already
exists.
3 Press [On/Yes] to replace the existing method or [Off/No] to return to the
stored methods list without saving the method.