Agilent Technologies 7000 Series User Manual

6 Operating in CI Mode
To Operate the Reagent Gas Flow Control Module
7000/7010 Series TQ GC/MS Operating Manual 139
To Operate the Reagent Gas Flow Control
Module
Procedure
1 In Instrument Control panel, select the MS Tune icon to display the Triple
Quadrupole MS Tune window. Select the Manual Tune tab, then select the
Ion Source tab to display the ion source parameters. (See Figure 44.)
Figure 44. CI flow control

Agilent Technologies 7000 Series Specifications

General

Brand	Agilent Technologies
Model	7000 Series
Category	Industrial Equipment
Language	English