7000/7010 Series TQ GC/MS Operating Manual 29
2 Installing 8890 GC Columns
Columns 30
To Install a Capillary Column in a Split/Splitless Inlet 32
To Condition a Capillary Column 35
To Install a Capillary Column in the GC/MS Interface Using the Self-Tightening
Column Nut 37
To Install a Capillary Column in the GC/MS Interface Using a Standard Column
Nut 42
To Install the GC/MS Interface Tip Seal 45
The GC/MS Interface for an 8890 Series GC 47
This chapter shows you how to select, install, and condition a GC column, which
must be performed before you operate your MS.
To Next Page
Loading...
Need help?
General
