Agilent Technologies 7000 Series User Manual

3 Installing Intuvo 9000 GC Column
To Install a Column Guard or Jumper Chip
7000/7010 Series TQ GC/MS Operating Manual 61
20 Tighten the Guard Chip compression bolt using the provided torque driver
until you hear one click.
21 Install the inlet cover.
22 Install the bus door on its hinges and close it.
23 Close the GC front door.
24 If removed, install the ALS injector.

Agilent Technologies 7000 Series Specifications

General

Brand	Agilent Technologies
Model	7000 Series
Category	Industrial Equipment
Language	English