124 1260 Infinity Binary LC - System User Guide
6 Appendix
Setting Up a Method using Edit Entire Method
Diode Array Detector Tab
Figure 29 Setup Method screen – Diode Array Detector tab
• Signals: Up to eight separate signals (chromatograms) can be recorded.
To mark a signal for collection, check the Use Signal box for that signal,
define the wavelength and bandwidth, and if a reference signal is
required also check and define that box.
• Wavelength sets the central wavelength (nm) of the signal,
• Bandwidth sets the width (nm) of the signal,
To Next Page
Loading...
