Agilent Technologies Agilent 1260 Infinity User Manual

1260 Infinity Binary LC - System User Guide 45
Optimization of the Agilent 1260 Infinity Binary LC
3
How to Configure the Optimum Delay Volume
Optimum Instrument Configuration for 3 and 4.6 mm i.d. Columns
Standard delay volume configuration for highest UV sensitivity and direct
method transferability
The relative column volumes for 3 mm and 4.6 mm inner diameter
columns are about two and five times larger respectively than for the
same length 2.1 mm i.d. columns, and the flow rates that are used are
also proportionally higher. Therefore, the standard delay volume of the
binary pump will not result in a significantly higher gradient delay.
Figure 15 Standard delay volume configuration for 3 and 4.6 mm ID columns with
highest UV sensitivity
HiYYZaVnkdajbZ
9^hXdccZXidcan]ZgZ
EgZhhjgZ
HZchdg
;adlEVi]
+%%"-%%¥a
)%%¥aB^mZg
6
7
B^m^c\"I
EgZhhjgZHZchdg
Ejg\ZKVakZ
9VbeZg
+%%WVg9VbeZg
)%%¥aB^mZg
Ejg\ZKVakZ

Agilent Technologies Agilent 1260 Infinity Specifications

General

Brand	Agilent Technologies
Model	Agilent 1260 Infinity
Category	Laboratory Equipment
Language	English