84 1260 Infinity Binary LC - System User Guide
5 Quick Start Guide
Preparing the System
Loading the Default Method
The ChemStation has a default method named DEF_LC.M which is loaded at
first execution or whenever a new blank method template is required. It
contains default settings for all modules.
With this procedure, you load the method DEF_LC.M. You can use it to set
all parameters to default settings, or to get a blank method template
before setting up a new method.
1 Go to Method and Run Control view of the ChemStation.
2 On the menu bar, select Method > New Method..., and select DEF_LC.M
from the context menu.
Alternatively, you can use the Load Method icon under the menu bar,
or double- click the method name DEF_LC.M in the Methods tab of the
Navigation Pane.
The default method (DEF_LC.M) has a set of default parameters which can
then be modified to create a new method. For instance, the flow rate is
set to zero, and the Method Information and Method History are blank.
Note that this method can never be overwritten with new parameters. Hence clicking on
Save will re-direct you into the Save As... function, so that you must enter a different
method name.
To Next Page
Loading...
