1260 Infinity Binary LC - System User Guide 75
System Setup and Installation
4
Installing the Modules
Item p/n Description
1 G1312-87303 Capillary ST 0.17 mm x 400 mm S/S
(Pump to autosampler)
1 G1312-87304 Capillary ST 0.17 mm x 700 mm S/S
(Pump to cooled Autosampler)
2 G1313-87304 Capillary ST 0.12 mm x 180 mm S/S
(Autosampler to TCC)
2 01090-87610 Capillary ST 0.12 mmx 280 mm S/S
(cooled Autosampler to TCC or to item 3 if installed)
3 G1316-80002 Heater long-up (0.12 mm i.d., 1.6 µL internal volume)
3 G1316-80003 Heater long-down (0.12 mm i.d., 1.6 µL internal volume)
4 01090-87611 Capillary ST 0.12 mmx 105 mm S/S
(TCC to Column, not needed if item 3 is installed)
5 G1315-87312 Capillary ST 0.12 mm x 150 mm S/S
(Column to DAD)
6 5062-2462 Tube PTFE 0.8 mm x 2 m, re-order 5 m
(DAD to waste)
To Next Page
Loading...
