How to Perform a Wavelength Sweep Tunable Lasers
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 141
6 Press [Run Swp] to start the sweep. The screen in Figure 74 then appears.
7 You ca n:
• press [Next] to move on to the next wavelength step,
• press [Prev] to move on to the previous wavelength step, or
• press [Stop] to end the sweep.
Figure 74 Performing a Manual Sweep
8 Perform step 6 until you choose to press [Stop].
To Next Page
Loading...
