Installation
Agilent Cary 60 Spectrophotometer User’s Guide 21
3. Installation
Installation 21
Cell Holder 27
Other Sample Holders 30
Installing Accessories 30
Use the following checklist to make sure you have the work area
ready to install the Cary 60.
Preparation requirement Complete
All equipment is on site and has been checked for damage
The work area meets the environmental requirements (see Page 16).
A suitable workbench is available (see Page 17).
Suitable electrical power supplies are available (see Page 18).
A computer that meets requirements is available (see Page 19).
A working Microsoft Windows operating system is installed on the computer. For instructions on
installing this, refer to the documentation supplied with the operating system.
The Cary 60 has been unpacked (see Page 22).
Installation
The Agilent Cary 60 spectrophotometer is designed to be completely
customer-installable. When using a Microsoft Windows 7 computer
operating system, instructions for setting up the system are included
in the Cary 60 Installation Card supplied with the instrument or the
software installation instructions supplied with the software.
To Next Page
Loading...
Need help?
General
