Installation
Agilent Cary 60 Spectrophotometer User’s Guide 23
You should have received:
• 1x Cary 60 spectrophotometer
• 1x power supply and power cable
• 1x USB cable
• 1x Cary WinUV software installation CD
• This manual
NOTE
Accessories ordered are not listed here.
Any differences from the original order should be referred
immediately to your Agilent sales office. All contents of the shipping
packages should be assembled together when installation is to be
carried out by Agilent service personnel. Do not discard any
packaging components or filler materials
To unpack the Cary 60 spectrophotometer:
1 Open the packing box.
2 Two people should lift the Cary 60 from the packaging.
Installing the Cary WinUV Software
1 Insert the CD into the computer’s CD-ROM drive.
NOTE
The installation program should automatically launch. If it does not, run
d:\AgilentCaryWinUVSetup.
2 Follow the on-screen instructions.
3 Click Continue Anyway if the ‘Windows Logo testing’ message
appears.
4 Click Finish when the installation is complete.
To Next Page
Loading...
Need help?
General
