Troubleshooting
Agilent Cary 60 Spectrophotometer User’s Guide 37
No Green Light Indicating that the Cary 60 is Powered
The Cary 60 is powered from an external power supply. A green
power indicator light on the front of the Cary 60 indicates when the
instrument is powered.
Problem
The power indicator on the Cary 60 does not light when it is switched
on.
Solution
Check the connection of the Cary 60 to the external power supply.
Start Button Replaced with Connect Button
Problem 1
I have a ‘Connect’ button instead of a ‘Start’ button.
Solution
Only one Cary application at a time can communicate with the
instrument. If you want to change to another application you can
press the ‘Connect’ button to bring this application online.
When you turn on the Cary 60, it performs an initialization routine. If
you start another application such as Scan etc., before this
initialization has finished, the application’s ‘Start’ button will be
grayed out. Wait for the status line at the bottom of the application to
display ‘Idle’ and the ‘Start’ button will become active.
To Next Page
Loading...
Need help?
General
