136 Chapter 2
Instrument Functions: A - L
File
Instrument Functions: A - L
Remote Command:
:MMEMory:MOVE <‘file_name1’>,<‘file_name2’>
Remote Command Notes: <‘file_name1’> must include the complete path, and the case
must match that of the file to be renamed. <‘file_name2’> must contain
the complete path of the destination, and the case of any directories in the
path must match those of the directories in the destination path. The case
of the destination file name is always interpreted as uppercase.
You can use this command to move files between directories and drives,
even though there is no way to do this from the front panel.
Example: MMEM:MOVE ‘C:\STATE001.STA’,’C:\FREQ.STA’
2.6.6.2 Type
Enables you to select the type of file you want to rename.
See “File Types” on page 114 and
“Type” on page 117 for more information.
If
Type is set to All, the catalog displays all files, otherwise the files of the currently selected
file type are displayed. All directories are always displayed.
Key Path:
File, Rename
2.6.6.3 Sort
Allows you to view your saved files according to a selected file attribute.
See “Sort” on
page 118
for more information.
Key Path:
File, Rename
Type Format Extension
State State STA
Trace Trace + state TRC
Comma separated trace values CSV
Limit
Internal data format
LIM
Screen Bitmap GIF
Reverse bitmap GIF
Corrections
Internal data format
ANT, CBL, OTH, and
AMP
Measurement
Results
Comma separated values
CSV
To Next Page
Loading...
Need help?
General
