Agilent Technologies E4448A User Manual

Chapter 4 257
Instrument Functions: P - Z
System
Instrument Functions: P - Z
Remote Command:
:CALibration:TCORrections AUTO|ON|OFF
Example: CAL:TCOR OFF
4.9.5 Config I/O
Displays the keys and menus that enable you to identify and change the current GPIB
address and LAN settings.
Key Path: System
Remote Command:
There is no remote command for this key.
4.9.5.1 GPIB Address
Shows the current GPIB address and allows you to change this value using the numeric
keyboard. The new value is displayed in the active function area. The GPIB port is always
active. The knob and step keys are not active for this function.
Key Path: System, Config I/O
State Saved: Survives Preset and power cycle, but not saved in Instrument State.
SCPI Status Bits/
OPC Dependencies: None
Factory
Default: 18 (Reset by
System, Restore Sys Defaults.)
Terminators: Enter
Default Terminator: None
Resolution/Rounding/
Truncation: Integer
Knob Increment: 1
Step Key
Increment: 1
Range: 0 to 30
Remote Command:
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <integer>
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Example: SYST:COMM:GPIB:ADDR 20

Agilent Technologies E4448A Specifications

General

Brand	Agilent Technologies
Model	E4448A
Category	Measuring Instruments
Language	English