Agilent Technologies E4448A User Manual

186 Chapter 3
Instrument Functions: M - O
Marker ->
Instrument Functions: M - O
3.3.3 Mkr->Start
Changes the start frequency to the frequency of the active marker. The marker stays at
this frequency, so it moves to the left of the display. This function is not available in
Zero
Span
.
Key Path:
Marker ->
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:STARt
Example: CALC:MARK1:STAR sets the start frequency to the value (or delta value) of
marker 1.
3.3.4 Mkr->Stop
Changes the stop frequency to the frequency of the active marker. The marker stays at
this frequency, so it moves to the right of the display. This function is not available in
Zero
Span
.
Key Path:
Marker ->
Remote Command:
:CALCulate:MARKer[1]|2|3|4[:SET]:STOP
Example: CALC:MARK1:STOP sets the stop frequency to the value (or delta value) of
marker 1.

Agilent Technologies E4448A Specifications

General

Brand	Agilent Technologies
Model	E4448A
Category	Measuring Instruments
Language	English