368 Chapter 6
Using the STATus System
Common Using the STATus System IEEE Commands
Using the STATus System
Save
*SAV <register>
This command saves the instrument state to the specified instrument
memory register.
Key Type: There is no equivalent front-panel key.
Range: Registers are an integer, 0 to 127
Remarks: See also commands :MMEMory:LOAD:STATe and
:MMEMory:STORe:STATe
Example: *SAV 12
Front Panel
Access:
File, Save State
Service Request Enable
*SRE <integer>
*SRE?
This command sets the value of the service request enable register.
The query returns the value of the register.
Key Type: There is no equivalent front-panel key.
Range: Integer, 0 to 255
Example: *SRE 22
Read Status Byte Query
*STB?
Returns the value of the status byte register without erasing its
contents.
Key Type: There is no equivalent front-panel key.
Remarks: See *CLS
To Next Page
Loading...
Need help?
General
