Chapter 2 127
Instrument Functions: A - L
File
Instrument Functions: A - L
2.6.2.6 Dir Up
Moves up one subdirectory level within a directory. If your position is in the top level of the
drive already, it moves up to the drive level and the current drive is highlighted (A: or C:).
Key Path:
File, Save
Remote Command:
The directory is entered as part of the directory/path name that is sent with the SCPI
command. See
“Save Now” on page 121.
2.6.2.7 Dir Select
Displays the highlighted directory. See
“Dir Select” on page 120 for more information.
Key Path:
File, Save
Remote Command:
The directory is entered as part of the directory/path name that is sent with the SCPI
command. See
“Save Now” on page 121.
2.6.3 Load
Displays the menu key that enables you to load instrument-data files from the selected
drive and directory back into the instrument. This function displays the file list box, which
shows the data-entry fields for the file name, type, destination, and path.
The catalog list box is active and can be used for selecting the file information in the
data-entry fields. Only loadable files that match the current type are shown. Placing the
cursor on a file name causes it to be loaded into the file name field.
Key Path:
File
To Next Page
Loading...
Need help?
General
