Agilent Technologies E4448A User Manual

Chapter 4 265
Instrument Functions: P - Z
System
Instrument Functions: P - Z
4.9.8 Show Hdwr
Gives detailed information about the hardware installed on your instrument.
Key Path: System
Annunciation/
Annotation: Text screen
Dependencies/
Couplings: Active function is disabled
SCPI Status Bits/
OPC Dependencies: None
Factory Preset:
Off
Remote Command:
:SYSTem:CONFigure:HARDware OFF|ON|0|1
Example: SYST:CONF:HARD OFF
4.9.9 Color Palette
Displays the Color Palette menu keys that set the display screen attributes.
Key Path: System
SCPI Status Bits/
OPC Dependencies: None
State Saved: Not saved in Instrument State, survives
Preset, and power cycle.
Preset: Not affected by
Preset.
Factory
Default:
Default
Remote Command:
There is no remote command for this key.

Agilent Technologies E4448A Specifications

General

Frequency Range	3 Hz to 50 GHz
VBW (Video Bandwidth)	1 Hz to 10 MHz
Sweep Time	1 ms to 1000 s
Phase Noise	-110 dBc/Hz at 10 kHz offset (1 GHz)
Resolution Bandwidth	1 Hz to 10 MHz
Display	Color LCD
Input Impedance	50 Ohm
Operating Temperature	0°C to 55°C
Amplitude Range	+30 dBm
Input VSWR	< 1.5:1
Input Connector	Type-N female
Power Requirements	100 to 240 VAC, 50/60 Hz