268 Chapter 4
Instrument Functions: P - Z
System
Instrument Functions: P - Z
4.9.10.1 Front Panel Test
Used to test the front-panel keys. It shows a list of all the front-panel keys with counter
numbers indicating the number times the key is pressed. Press the
ESC key to exit the test
mode and return to the menu.
Key Path: System, Diagnostics
Annunciation/
Annotation: Text Screen
Dependencies/
Couplings: The active function is disabled.
Factory Preset: Off
4.9.11 Restore Sys Defaults
Resets the system settings, including most “persistent” functions, to their factory defaults.
It also does a Factory Preset that resets the analyzer to the Spectrum Analysis Mode. It
does not reset user data such as saved instrument states.
Persistent functions are things such as the GPIB address, time/date display style, and
auto-alignment state. These are parameters that are unaffected by a power cycle or an
instrument preset.
Table 4-2 System Default Settings
Feature Default Setting Restored?
Automatic Alignment On/Alert/Off On yes
Power On Last/Preset Preset yes
Preset Type Factory/User/Mode Mode yes
External Amplifier Gain 0 dBm yes
Input Impedance 50 Ohm yes
GPIB Address 18 yes
IP address 10.10.10.10 no
Host Name mypsa no
Subnet Mask 255.255.0.0 no
SCPI Telnet Port 5023 On yes
SCPI Socket Port 5025 On yes
SICL Server On yes
Instrument Color Palette Default palette yes
Printer Setup, Language PCL3 yes
To Next Page
Loading...
Need help?
General
