Control Module Screens of the Well-plate Samplers 8
1100 Series WS MWS Reference Manual 257
Method screens
Use Esc to return to the Analysis screen. Use the F3-key (Method) to view the
parameters in a method. Use the F8-key (Save As) to save the method in the
mdodule(s). The PC-Card-key is only active when a PCMCIA card is inserted in
the control module.
Use F2-key (PC-Card) to save a method on a PCMCIA card.
NOTE
The PCMCIA card must have been inserted into the control module prior to the last start-up
in order to be recognized.
To Next Page
Loading...
