G1369C LAN Interface User Manual 33
Getting Started 2
Automatic Configuration with Bootp
The MAC address can be found on a label on the card, see Figure 6 on
page 17.
Figure 20 Bootp Server
4 Identify your LAN Interface Card by the MAC address, see Figure 20.
5 Select Configure - > Add Entry to configure the Bootp Manager
(Figure 22). The drop down box “MAC address” lists all MAC addresses
found. Select your MAC address. If no hardware address is found, select
Cancel and repeat step 3 and step 4.
Figure 21 Add Bootp Entry - Select the MAC address
If you are working in a network system, you may see other LAN Interfaces appear,
overwriting your LAN Interface Card information periodically.
To Next Page
Loading...
Need help?
General