Agilent Technologies G1369C - Page 34

34 G1369C LAN Interface User Manual
2Getting Started
Automatic Configuration with Bootp
6 Specify the Host Name (LC1100- 01), the IP address (134.40.24.230), the
Comment (LC1100- 01) and the Subnet Mask 255.255.248.0 and the
Gateway (134.40.24.1).
Figure 22 Add Bootp Entry - Enter your parameter
7 Exit with OK.
8 Select Configure - > Bootp Manager. All entries made above are shown
in Figure 23 on page 35.
NOTE
If you are working in a network system, you need your own addresses. Contact your local IT
group.