Index
Service Guide N5242-90001 Index-21
source 1 pulse modulator,
Option 021
, 2-4
source 2 pulse modulator,
Option 022
, 2-4
time domain, Option 010
, 2-3
vector and scalar calibrated
frequency converter
measurements
Option 083
, 2-5
upgrade kits
order numbers, 6-83
part numbers
, 6-82
upgrades
analyzer, 2-8
firmware
, 8-17
USB
accessories
CD-RW drive, 2-9
hub
, 2-9
part numbers
, 6-83
port
rear panel connector
, 5-33
rear panel
troubleshooting
, 4-17
USB board
removal and replacement
illustrated
, 7-11
procedure, 7-10
troubleshooting
, 4-13
USB board, front panel
illustrated, 6-13
part number, 6-12
USB controller board
removal and replacement
illustrated
, 7-11
procedure, 7-11
USB controller board, front panel
illustrated, 6-13
part number
, 6-12
USB hub, accessory
, 2-9
utility
option enable, 8-13
accessing
, 8-13
dialog box
, 8-13
V
VCO (voltage-controlled
oscillator)
defined, 5-7
vector and scalar calibrated
converter measurements
Option 083, 2-5
ventilation requirements
, 1-3
verification
ANSI/NCSL Z540-1-1994, 3-8
kits, 2-11, 3-7
substitution
, 3-23
non-ANSI/NCSL Z540-1-1994
,
3-9
of operating environment, 3-4
of operating specifications
, 3-4
system
, 3-1, 3-7, 3-19
dialog box, 3-23
example of results
, 3-26, 3-27
failure flowchart
, 3-25
failure of, 3-25
getting ready
, 3-4
interpreting results
, 3-26
performing, 3-22
procedure
, 3-23
what it verifies
, 3-19
VGA monitor
, 4-12
VGA port
rear panel connector, 5-33
W
warm up
analyzer, 3-4
warning
, 1-3
warnings
for servicing, 1-4
warranty
service
standard
, 2-13
three-year return to Agilent
,
2-13
Windows
, 2-10
wire harnesses
in bottom assembly, Option 200
illustrated
, 6-23
part numbers, 6-22
in bottom assembly, Option 219
illustrated
, 6-31
part numbers, 6-30
in bottom assembly, Option 224
illustrated
, 6-39
part numbers
, 6-38
in bottom assembly, Option 400
illustrated
, 6-45
part numbers
, 6-44
in bottom assembly, Option 419
illustrated
, 6-57
part numbers
, 6-56
in bottom assembly, Option 423
illustrated
, 6-69
part numbers
, 6-68