Agilent Technologies U3402A

Specifications and Characteristics 6
U3402A User’s and Service Guide 105
Reading rates
Math Operation
• dBm, Rel, MinMax, Comp, Hold
I/O Interface
• RS232
[3]
Notes:
1 Reference impedance is displayed on the secondary display.
2 Reading displayed in watts (Audio power).
3 For calibration use only.
Table 6 - 9 Supplemental measurement specifications (continued)
NOTE
When V
ac+dc
measurement function is selected, the VDC input impedance is parallel with
an AC-couples 1.1 MW divider.
Table 6 - 10 Reading rates for single display (readings/second (approx))
Measurement functions Slow Medium Fast
DCV
2.2 5.5 22.0
DCA
2.2 5.5 22.0
Diode
2.2 5.5 22.0
ACV
2.2 5.5 22.0
ACA
2.2 5.5 22.0
2-wire W
2.2 5.5 22.0
4-wire W, 4MW/1.2MW range and below
0.7 0.9 1.0
4-wire W, 12MW range and above
1.5 1.8 2.0
Frequency (5Hz)
1.0 1.7 2.3
ACV + DCV
0.8 1.1 1.6
ACA + DCA
0.5 0.7 0.9