Getting Started 1
U3402A User’s and Service Guide 3
Checking the shipping contents
Verify that you have received the following items with your multimeter:
• Power cord
• Standard test lead kit
• Quick start guide
• Product reference CD
• Test report
• Certificate of calibration
Inspect the shipping container for damage. Signs of damage may include a
dented or torn shipping container or cushioning material that shows signs of
unusual stress or compacting.
Carefully remove the contents from the shipping container and verify that any
options ordered are included with the shipment by checking the packing list
included with the shipment.
If anything is missing, contact your nearest Agilent Sales Office.
Original packaging
Containers and materials identical to those used in the factory pakaging are
available through Agilent Technologies office. If the multimeter is being
returned to Agilent Technologies for servicing, attach a tag indicating the type
of service required, return address, model number, and serial number. Also
mark the container FRAGILE to assure careful handling. In any
correspondence, refer to the multimeter by model number and serial number.
• If the shipping container or packaging material is damaged, it should be kept until the
contents have been checked mechanically and electrically. If there is mechanical
damage, notify the nearest Agilent Technologies office. Keep the damaged shipping
materials (if any) for inspection by the carrier and Agilent representative. If required, you
can find a list of Agilent Sales and Service Offices on the last page of this guide.
• Ensure you have read and understand the preceding safety information before
you proceed.
To Next Page
Loading...
Need help?
General
