2 Operations and Features
24 U3402A User’s and Service Guide
Figure 2-4 Typical Min operation display
Each time a new minimum or maximum value is stored, the multimeter beeps
once (if the beeper is enabled) and briefly turns on the appropriate MAX or
MIN annunciator.
Accumulated statistics are:
• MAX—maximum reading since MinMax was enabled
• MIN—minimum reading since MinMax was enabled
• MINMAX—actual readings
Procedure
1 Press to enable MinMax operation.
2 Press to cycle through the available MINMAX operations (MIN, MAX,
or MINMAX).
3 Press
to disable the MinMax operation.
When MinMax is enabled, the measurement range changed to manual ranging and the
current measurement mode is locked until MinMax is disabled (with other ranges being
selected or autoranging is enabled).
To Next Page
Loading...
